| Description | • Used for pinching, cutting or pulling an object
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2024/01/Tower-Pincer.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2024/01/Tower-Pincer.00_00_06_13.Still001.jpg"][/video] | • For use with air or electric power tools
• Standard: Conforms to DIN 3121/ISO 1174
• Hardened & tempered to 40-45 HRC
• Material: Chrome Molybdenum Steel | • Chrome vanadium steel
• With hole on tip | • For use with air or electric power tools
• Standard: Conforms to DIN 3121/ISO 1174
• Hardened & tempered to 50-58 HRC
• Material: Chrome Molybdenum Steel | • Material: Chrome Vanadium
• Standard: Conforms to DIN 3122 Form G / ISO 3315
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/L-Handle-1.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Comp-1-0000620.jpg"][/video] | • Standard: Conforms to DIN 3121/ISO 1174
• Hardened & tempered to 40-45 HRC
• Material: Chrome Molybdenum Steel
• Size 200 & 300mm with ball retainer, 400mm without ball retainer |
| Content |
| Mfr.PN |
Size (mm) |
Part Number |
| 438-8 |
200 |
HT0003684 |
|
| Mfr.PN |
Sq Drive(in) |
Length(mm) |
Part Number |
| 164-1/2X3/8 |
1/2"F-3/8"M |
38 |
HT0002022 |
| 164-1/2X3/4 |
1/2"F-3/4"M |
48 |
HT0002023 |
|
| Mfr.Pn |
Size (mm) |
No Pieces |
Part Number |
| 332S-TX |
T10 • T15 • T20 • T25 • T27 • T30 • T40 • T50 |
9 |
HT0001051 |
|
| Mfr.PN |
Sq. Drive (in) |
Length(mm) |
Part Number |
| 172-1X3/4 |
1"F-3/4"M |
72 |
HT0002270 |
| 172-1X1.1/2 |
1"F-1.1/2"M |
90 |
HT0002271 |
|
| Mfr.PN |
Length(mm) |
Part Number |
| 331-300 |
300 |
HT0003456 |
|
| Mfr.PN |
Length(mm) |
Part Number |
| 173-150 |
150 |
HT0003728 |
| 173-200 |
200 |
HT0002272 |
| 173-250 |
250 |
HT0003602 |
| 173-300 |
300 |
HT0002273 |
| 173-400 |
400 |
HT0002274 |
|
