| Description | • Anti Slip Pattern
• Torque ability exceeds DIN requirement by 25%
• Jaw set at 15°
• Material: 31 CrV 3 Chrome Vanadium Steel
• Standard: Conforms to DIN 3110, ISO 3318, ISO 1085
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Double-Ring-Wrench.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Comp-1-0000626.jpg"][/video] | • Material: 31 CrV 3 Chrome Vanadium Steel
• Standard: Conforms to DIN 3122, form F/ISO 3315 | • Left Cut: Cuts left from tight curves to straight
• Center Cut: Cuts straight and slight curves
• Right Cut: Cuts right from tight curves to straight | • Set of 6 pieces parallel pin punch of various size in plastic holder | • Sets of standard hex key in plastic clip holder
• Extra long pattern for difficult to reach areas
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Hex-Key-1.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Hex-Key.mp4"][/video] | • Ratcheting mechanism with adjustable clamping force allows for precise, repeatable crimps
• Steel jaw contains color-coded wire size markings for red (22-18 AWG), blue (16-14 AWG), and yellow (12-10 AWG) terminals
• Ideal for nylon insulated solderless terminals - It is not recommended to be used with heat-shrink connectors |
| Content |
| Mfr.PN |
Size |
No. Pieces |
Part Number |
| 102S-8 |
6 x 7 • 8 x 9 • 10 x 11 • 12 x 13 •
14 x 15 • 16 x 17 • 18 x 19 • 20 x 22 |
8 |
HT0000060 |
| 102S-12 |
6 x 7 • 8 x 9 • 10 x 11 • 12 x 13 • 14 x 15 • 16 x 17 • 18 x 19 • 20 x 22 • 21 x 23 • 24 x 27 • 25 x 28 • 30 x 32 |
12 |
HT0000061 |
| 102A-8S |
1/4" x 5/16” • 3/8” x 7/16” • 1/2” x 9/16” • 9/16” x 5/8” • 11/16” x 3/4" • 13/16” x 7/8” • 15/16” x 1” • 1.1/8” x 1.1/4” |
8 |
HT0000062 |
| 102A-12S |
1/4" x 5/16” • 5/16” x 3/8” • 7/16” x 1/2” • 1/2” x 9/16” • 9/16” x 5/8” • 11/16” x 3/4" • 13/16” x 7/8” • 15/16” x 1” • 1” x 1.1/8” • 1.1/16” x 1.1/4” |
10 |
HT0000063 |
|
| Mfr.PN |
Length(mm) |
Part Number |
| 123FH |
250 |
HT0001487 |
|
| Mfr.PN |
Pattern |
Part Number |
| 250 |
Left |
HT0002469 |
| 250 |
Straight |
HT0002470 |
| 250 |
Right |
HT0002471 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 196SH-8 |
2, 3, 4, 5, 6, 8 |
HT0002588 |
| 196SH-10 |
3, 4, 5, 6, 8, 10 |
HT0002589 |
| -
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108L-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001005 |
| 108L-9A |
1/16" - 3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001006 |
|
| Mfr.PN |
Length(mm) |
Range |
Part Number |
| 214 |
200 |
22-10 AWG / 0.5-6mm2 |
HT0002435 |
|
