| Description | • Precision ground edges for sharpness, guaranteed edge hardness up to 65 HRC
• Suitable for hardened wire, steel wire, tensile strength up to 2300
• N/mm2Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5749 | • Sets of standard hex key in plastic clip holder
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.mp4"][/video] | • Heavy gauge steel
• Drawer slides type ball bearing
• Powder coating finish | • For PH screws
• CR-V steel
• Chrome plated
• Two component handle
• Blade with magnetic tip
| • Designed for use in high-voltage areas with up to 1000V of alternating current, VDE certified, and built to meet IEC/EN 60900-2012
• Built with three functions– a flat gripping surface with fine serrations, a crimping edge and a cutting edge | • Left Cut: Cuts left from tight curves to straight
• Center Cut: Cuts straight and slight curves
• Right Cut: Cuts right from tight curves to straight |
| Content |
| Mfr.PN |
Length(mm) |
Part Number |
| 179-6 |
150 |
HT0002343 |
| 179-8 |
200 |
HT0002344 |
|
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108S-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001003 |
| 108S-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001004 |
|
| Size(mm) |
No. of drawer |
Part Number |
| 650 x 316 x 386 |
6 |
HT0003453 |
|
| Mfr.PN |
PH |
Blade Length(mm) |
Part Number |
| 403-PH0 |
PH0 |
60 |
HT0003652 |
| 403-PH1 |
PH1 |
80 |
HT0003653 |
| 403-PH2 |
PH2 |
100 |
HT0003654 |
| 403-PH3 |
PH3 |
150 |
HT0003655 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 339-200 |
200 |
HT0003475 |
|
| Mfr.PN |
Pattern |
Part Number |
| 250 |
Left |
HT0002469 |
| 250 |
Straight |
HT0002470 |
| 250 |
Right |
HT0002471 |
|
