| Description | • Left Cut: Cuts left from tight curves to straight
• Center Cut: Cuts straight and slight curves
• Right Cut: Cuts right from tight curves to straight
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Aviation-Snip.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Tin-Snip.00_00_06_19.Still001.jpg"][/video] | • For non insulated terminals
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Crimping-Plier-For-Non-Insulated-Termina.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Crimping-Plier-For-Non-Insulated-Termina.00_00_06_28.Still001.jpg"][/video] | • Sets of standard hex key in plastic clip holder
• Extra long pattern for difficult to reach areas
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Hex-Key-1.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Hex-Key.mp4"][/video] | • Sets of standard hex key in plastic clip holder
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.mp4"][/video] | • For PH screws
• CR-V steel
• Chrome plated
• Two component handle
• Blade with magnetic tip
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Phillips-Screwdriver.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Phillips-Screwdriver.jpg"][/video] | • Ratcheting mechanism with adjustable clamping force allows for precise, repeatable crimps
• Steel jaw contains color-coded wire size markings for red (22-18 AWG), blue (16-14 AWG), and yellow (12-10 AWG) terminals
• Ideal for nylon insulated solderless terminals - It is not recommended to be used with heat-shrink connectors
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Ratchet-Crimping-Plier.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Large-Retaining-Circlip-Plier-External.00_00_07_19.Still004.jpg"][/video] |
| Content |
| Mfr.PN |
Pattern |
Size |
Part Number |
| 389-10 |
Straight |
250mm |
HT0002470 |
|
| Mfr.PN |
Size |
Part Number |
| 364-8 |
1.25 - 8mm2 |
HT0002442 |
| 364-16 |
1.25 – 16mm2 |
HT0002443 |
| 364-25 |
5.5 – 25mm2 |
HT0002444 |
| -
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108L-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001005 |
| 108L-9A |
1/16" - 3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001006 |
|
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108S-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001003 |
| 108S-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001004 |
|
| Mfr.PN |
PH |
Blade Length(mm) |
Part Number |
| 403-PH0 |
PH0 |
60 |
HT0003652 |
| 403-PH1 |
PH1 |
80 |
HT0003653 |
| 403-PH2 |
PH2 |
100 |
HT0003654 |
| 403-PH3 |
PH3 |
150 |
HT0003655 |
|
| Mfr.PN |
Length(mm) |
Range |
Part Number |
| 214 |
200 |
22-10 AWG / 0.5-6mm2 |
HT0002435 |
|
