| Description | • Material: 31 CrV 3 Chrome Vanadium Steel
• Standard: Conforms to DIN 3123, form A/ISO 3316 | • For PH screws
• CR-V steel
• Chrome plated
• Two component handle
• Blade with magnetic tip
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Phillips-Screwdriver.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Phillips-Screwdriver.jpg"][/video] | • Sets of standard hex key in plastic clip holder
• Extra long pattern for difficult to reach areas
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Hex-Key-1.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Hex-Key.mp4"][/video] | • Suitable for use in awkward areas, swivel angle up to 30°
• Sets of standard hex key in plastic clip holder
• Extra long pattern for difficult to reach areas
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.mp4"][/video] | • Designed for use in high-voltage areas with up to 1000V of alternating current, VDE certified, and built to meet IEC/EN 60900-2012
• Plier jaws have fine serrations to grip work tightly, combined with a side cutting blade to cut wires
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Long-Nose-Plier.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Long-Nose-Plier.jpg"][/video] | • Ratcheting mechanism with adjustable clamping force allows for precise, repeatable crimps
• Steel jaw contains color-coded wire size markings for red (22-18 AWG), blue (16-14 AWG), and yellow (12-10 AWG) terminals
• Ideal for nylon insulated solderless terminals - It is not recommended to be used with heat-shrink connectors
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Ratchet-Crimping-Plier.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Large-Retaining-Circlip-Plier-External.00_00_07_19.Still004.jpg"][/video] |
| Content |
| Mfr.PN |
Sq Drive (in) |
Length(mm) |
Part Number |
| 127AP-1 |
3/8"F - 1/4"M |
27 |
HT0001494 |
| 127AP-2 |
3/8"F - 1/2"M |
36 |
HT0001495 |
|
| Mfr.PN |
PH |
Blade Length(mm) |
Part Number |
| 403-PH0 |
PH0 |
60 |
HT0003652 |
| 403-PH1 |
PH1 |
80 |
HT0003653 |
| 403-PH2 |
PH2 |
100 |
HT0003654 |
| 403-PH3 |
PH3 |
150 |
HT0003655 |
| -
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108L-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001005 |
| 108L-9A |
1/16" - 3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001006 |
|
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108BLS-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001007 |
| 108BLS-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001008 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 341-200 |
200 |
HT0003476 |
|
| Mfr.PN |
Length(mm) |
Range |
Part Number |
| 214 |
200 |
22-10 AWG / 0.5-6mm2 |
HT0002435 |
|
