Description | • Material: 31 CrV 3 Chrome Vanadium Steel
• Standard: Conforms to DIN 3123, form C/ISO 3316
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/11/Unibersal-Joint.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/11/Intro-0000614.jpg"][/video] | • Hardened black jaws up to 65 HRC for heavy duty use
• Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5746 | • 7 adjustment position
• Meets & Exceeds DIN standards
• Made of hot forged, hardened & tempered chrome vanadium steel 40 CrV | • Suitable for use in awkward areas, swivel angle up to 30°
• Sets of standard hex key in plastic clip holder
• Extra long pattern for difficult to reach areas
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.mp4"][/video] | • Left Cut: Cuts left from tight curves to straight
• Center Cut: Cuts straight and slight curves
• Right Cut: Cuts right from tight curves to straight | • Sets of standard hex key in plastic clip holder
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.mp4"][/video] |
Content |
Mfr.PN |
Sq.Drive |
Length(mm) |
Part Number |
116UJ |
1/4” |
114 |
HT0001395 |
|
Mfr.PN |
Length(mm) |
Part Number |
177-6 |
150 |
HT0002326 |
177-7 |
175 |
HT0002327 |
177-8 |
200 |
HT0002328 |
|
Mfr.PN |
Length(mm) |
Part Number |
183-10 |
250 |
HT0002410 |
183-12 |
300 |
HT0002411 |
183-16 |
400 |
HT0002412 |
|
Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
108BLS-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001007 |
108BLS-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001008 |
|
Mfr.PN |
Pattern |
Part Number |
250 |
Left |
HT0002469 |
250 |
Straight |
HT0002470 |
250 |
Right |
HT0002471 |
|
Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
108S-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001003 |
108S-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001004 |
|