| Description | • For use with a striking hammer
• Material: High grade tool steel
• Standard: Conforms to DIN 133/ISO 691
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/11/Slogging-Open-End-Wrench.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/11/Comp-1-0000611.jpg"][/video] | • Sets of standard hex key in plastic clip holder
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.mp4"][/video] | • Material: 31 CrV 3 Chrome Vanadium Steel
• Standard: Conforms to DIN 3122, form F/ISO 3315 | • Left Cut: Cuts left from tight curves to straight
• Center Cut: Cuts straight and slight curves
• Right Cut: Cuts right from tight curves to straight
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Aviation-Snip.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Tin-Snip.00_00_06_19.Still001.jpg"][/video] | • Made of rust and corrosion resistant cold rolled steel sheets and electro powder coated
• Useful capacity up to 40kg
• Predrilled holes on all corners for water flow, extending tool box life
• Single Handle | • Precision ground edges for sharpness, guaranteed edge hardness up to 65 HRC
• Suitable for hardened wire, steel wire, tensile strength up to 2300 N/mm2
• Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5749 |
| Content |
| Mfr.PN |
Size(mm) |
Length(mm) |
Part Number |
| 106-24 |
24 |
180 |
HT0000649 |
| 106-27 |
27 |
180 |
HT0000650 |
| 106-30 |
30 |
190 |
HT0000651 |
| 106-32 |
32 |
195 |
HT0000652 |
| 106-36 |
36 |
210 |
HT0000654 |
| 106-38 |
38 |
218 |
HT0000655 |
| 106-41 |
41 |
225 |
HT0000656 |
| 106-46 |
46 |
225 |
HT0000657 |
| 106-50 |
50 |
280 |
HT0000658 |
| 106-55 |
55 |
310 |
HT0000659 |
| 106-60 |
60 |
320 |
HT0000660 |
| 106-65 |
65 |
342 |
HT0000661 |
|
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108S-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001003 |
| 108S-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001004 |
|
| Mfr.PN |
Sq.Drive |
Length(mm) |
Part Number |
| 112FH |
1/4” |
150 |
HT0001388 |
|
| Mfr.PN |
Pattern |
Size |
Part Number |
| 389-10 |
Straight |
250mm |
HT0002470 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 75-5 |
530 x 200 x 200 |
HT0000033 |
|
| Mfr.PN |
Length(mm) |
Part Number |
| 179-6 |
150 |
HT0002343 |
| 179-8 |
200 |
HT0002344 |
|
