| Description | • Chrome vanadium steel
• Suitable for work on engines e.g. bolts on alternator, carburator and starter
• Standard conforms to ISO 3318
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Half-Moon-Wrench.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Comp-1-0000621.jpg"][/video] | • Suitable for use in awkward areas, swivel angle up to 30°
• Sets of standard hex key in plastic clip holder
• Extra long pattern for difficult to reach areas
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.mp4"][/video] | • Hardened black jaws up to 65 HRC for heavy duty use
• Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5745
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Long-Nose-pleire.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Long-Nose-Plier.00_00_06_16.Still001.jpg"][/video] | • Precision ground edges for sharpness, guaranteed edge hardness up to 65 HRC
• Suitable for hardened wire, steel wire, tensile strength up to 2300 N/mm2
• Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5749 | • Designed for use in high-voltage areas with up to 1000V of alternating current, VDE certified, and built to meet IEC/EN 60900-2012
• Diagonal cutting blade design makes clean and precise cuts so professionals can do their best work
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Diagonal-Cutting-Plier.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Diagonal-Cutting-Plier.jpg"][/video] | • Set of 6 pieces parallel pin punch of various size in plastic holder
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Parallel-Pin-Punch.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Parallel-Pin-Punch.mp4"][/video] |
| Content |
| Mfr.PN |
Size(mm) |
Size(in) |
Part Number |
| 103-10X12 |
10 x 12 |
|
HT0003446 |
| 103-11X13 |
11 x 13 |
|
HT0003447 |
| 103-13x15 |
13 x 15 |
|
HT0003643 |
| 103-14X17 |
14 x 17 |
|
HT0000503 |
| 103-16X18 |
16 x 18 |
|
HT0003448 |
| 103-19X22 |
19 x 22 |
|
HT0003449 |
| 103A-7/16X1/2 |
|
7/16” x 1/2” |
HT0003450 |
| 103A-1/2X9/16 |
|
1/2“ x 9/16” |
HT0003481 |
| 103A-9/16X5/8 |
|
9/16” x 5/8” |
HT0003451 |
| 103A-11/16X3/4 |
|
11/16” x 3/4” |
HT0003467 |
| 103A-13/16x7/8 |
|
13/16" x 7/8" |
HT0003644 |
| 103A-3/4X7/8 |
|
3/4” x 7/8” |
HT0003452 |
|
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108BLS-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001007 |
| 108BLS-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001008 |
|
| Mfr.PN |
Length(mm) |
Length (in) |
Part Number |
| 178-6 |
150 |
6" |
HT0002332 |
| 178-8 |
200 |
8" |
HT0002333 |
|
| Mfr.PN |
Length(mm) |
Length (In) |
Part Number |
| 179-6 |
150 |
6" |
HT0002343 |
| 179-8 |
200 |
8" |
HT0002344 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 340-150 |
150 |
HT0003477 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 196SH-8 |
2, 3, 4, 5, 6, 8 |
HT0002588 |
| 196SH-10 |
3, 4, 5, 6, 8, 10 |
HT0002589 |
|
