| Description | • Fully forged from premium grade chrome vanadium steel to meet and exceed international quality standards
• Ratcheting box end needs as little as 5˚ to move a fastener vs 30˚ for standard box end wrenches
• Standard: DIN ISO 691, DIN ISO 1711
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Combination-Ratchet-Wrench-1.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Comp-1-0000622.jpg"][/video] | • For PH screws
• CR-V steel
• Chrome plated
• Two component handle
• Blade with magnetic tip
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Phillips-Screwdriver.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Phillips-Screwdriver.jpg"][/video] | • Precision ground edges for sharpness, guaranteed edge hardness up to 65 HRC
• Suitable for hardened wire, steel wire, tensile strength up to 2300 N/mm2
• Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5749 | • Left Cut: Cuts left from tight curves to straight
• Center Cut: Cuts straight and slight curves
• Right Cut: Cuts right from tight curves to straight
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Aviation-Snip.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Tin-Snip.00_00_06_19.Still001.jpg"][/video] | • Made of rust and corrosion resistant cold rolled steel sheets and electro powder coated
• Greater capacity: Longer dimension at 18.5" than most tool box
• Predrilled hole on cover lid for" padlock (padlock excluded)
• Double Handle | • Sets of standard hex key in plastic clip holder
• Extra long pattern for difficult to reach areas
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Hex-Key-1.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Hex-Key.mp4"][/video] |
| Content |
| Mfr.PN |
Size(mm) |
Size(in) |
Length(mm) |
Part Number |
| 415-8 |
8 |
|
135 |
HT0003614 |
| 415-9 |
9 |
|
136 |
HT0003615 |
| 415-10 |
10 |
|
160 |
HT0003616 |
| 415-11 |
11 |
|
160 |
HT0003617 |
| 415-12 |
12 |
|
160 |
HT0003618 |
| 415-13 |
13 |
|
180 |
HT0003619 |
| 415-14 |
14 |
|
193 |
HT0003620 |
| 415-15 |
15 |
|
200 |
HT0003621 |
| 415-16 |
16 |
|
216 |
HT0003622 |
| 415-17 |
17 |
|
233 |
HT0003623 |
| 415-18 |
18 |
|
239 |
HT0003624 |
| 415-19 |
19 |
|
250 |
HT0003625 |
| 415A-5/16 |
|
5/16" |
136 |
HT0003626 |
| 415A-3/8 |
|
3/8" |
160 |
HT0003627 |
| 415A-7/16 |
|
7/16" |
160 |
HT0003758 |
| 415A-1/2 |
|
1/2" |
160 |
HT0003666 |
| 415A-9/16 |
|
9/16" |
193 |
HT0003667 |
| 415A-5/8 |
|
5/8" |
216 |
HT0003668 |
| 415A-11/16 |
|
11/16" |
239 |
HT0003669 |
| 415A-3/4 |
|
3/4" |
250 |
HT0003670 |
|
| Mfr.PN |
PH |
Blade Length(mm) |
Part Number |
| 403-PH0 |
PH0 |
60 |
HT0003652 |
| 403-PH1 |
PH1 |
80 |
HT0003653 |
| 403-PH2 |
PH2 |
100 |
HT0003654 |
| 403-PH3 |
PH3 |
150 |
HT0003655 |
|
| Mfr.PN |
Length(mm) |
Length (In) |
Part Number |
| 179-6 |
150 |
6" |
HT0002343 |
| 179-8 |
200 |
8" |
HT0002344 |
|
| Mfr.PN |
Pattern |
Size |
Part Number |
| 389-10 |
Straight |
250mm |
HT0002470 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 75-3 |
470 x 220 x 195 |
HT0000031 |
| -
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108L-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001005 |
| 108L-9A |
1/16" - 3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001006 |
|
