| Description | • Anti Slip Pattern
• Torque ability exceeds DIN requirement by 25%
• Jaw set at 15°
• Material: 31 CrV 3 Chrome Vanadium Steel
• Standard: Conforms to DIN 3110, ISO 3318, ISO 1085
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Double-Open-End-Wrench.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Comp-1-0000712.jpg"][/video] | • Sets of standard hex key in plastic clip holder
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.mp4"][/video] | • Designed for use in high-voltage areas with up to 1000V of alternating current, VDE certified, and built to meet IEC/EN 60900-2012
• Built with three functions– a flat gripping surface with fine serrations, a crimping edge and a cutting edge
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Combination-Plier.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Combination-Plier.jpg"][/video] | • Set of 6 pieces parallel pin punch of various size in plastic holder
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Parallel-Pin-Punch.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Parallel-Pin-Punch.mp4"][/video] | • 1000V Insulated with dual color component handles VDE tested, VDE/GS certified
• 60Cr-V Chrome vanadium steel drop forged, induction hardened body hardness HRC40-50, additional induction hardened for gripping surfaces hardness HRC55-65
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000v-Waterpump-Plier.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Waterpump-Plier.jpg"][/video] | • Hardened black jaws up to 65 HRC for heavy duty use
• Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5745
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Long-Nose-pleire.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Long-Nose-Plier.00_00_06_16.Still001.jpg"][/video] |
| Content |
| Mfr.PN |
Size |
No. Pieces |
Part Number |
| 101S-8 |
6 x 7 • 8 x 9 • 10 x 11 • 12 x 13 • 14 x 15 • 16 x 17 • 18 x 19 • 22 x 24 |
8 |
HT0000050 |
| 101S-12 |
6 x 7•8 x 9•10 x 11•12 x 13• 14 x 15• 16 x 17•18 x 19•20 x 22•21 x 23• 24 x 27•25 x 28•30 x 32 |
12 |
HT0000051 |
| 101A-8S |
1/4" x 5/16” •3/8” x 7/16” •1/2” x 9/16” • 9/16” x 5/8” •11/16” x 3/4" •13/16” x 7/8” • 15/16” x 1” •1.1/8” x 1.1/4” |
8 |
HT0000052 |
| 101A-10S |
1/4" x 5/16" • 5/16" x 3/8" • 7/16" x 1/2" • 1/2" x 9/16" • 9/16" x 5/8" • 3/4" x 11/16" • 13/16" x 7/8" • 15/16" x 1" • 1" x 1.1/8" • 1.1/16" x 1.1/4" |
10 |
HT0003787 |
| 101A-12S |
1/4" x 5/16” • 5/16” x 3/8” • 3/8" x 7/16" • 7/16” x 1/2” • 1/2” x 9/16” • 9/16” x 5/8” • 3/4" x 11/16" • 13/16” x 7/8” •15/16” x 1” •1” x 1.1/8” • 1.1/16” x 1.1/4” • 1.1/8" X 1.1/4" |
12 |
HT0000053 |
|
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108S-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001003 |
| 108S-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001004 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 339-200 |
200 |
HT0003475 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 196SH-8 |
2, 3, 4, 5, 6, 8 |
HT0002588 |
| 196SH-10 |
3, 4, 5, 6, 8, 10 |
HT0002589 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 338-250 |
250 |
HT0003664 |
|
| Mfr.PN |
Length(mm) |
Part Number |
| 178-6 |
150 |
HT0002332 |
| 178-8 |
200 |
HT0002333 |
|
