| Description | • Left Cut: Cuts left from tight curves to straight
• Center Cut: Cuts straight and slight curves
• Right Cut: Cuts right from tight curves to straight
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Aviation-Snip.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Tin-Snip.00_00_06_19.Still001.jpg"][/video] | • For non insulated terminals
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Crimping-Plier-For-Non-Insulated-Termina.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Crimping-Plier-For-Non-Insulated-Termina.00_00_06_28.Still001.jpg"][/video] | • Precision ground edges for sharpness, guaranteed edge hardness up to 65 HRC
• Suitable for hardened wire, steel wire, tensile strength up to 2300 N/mm2
• Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5749 | • Made of rust and corrosion resistant cold rolled steel sheets and electro powder coated
• Useful capacity up to 40kg
• Predrilled holes on all corners for water flow, extending tool box life
• Single Handle | • Material: 31 CrV 3 Chrome Vanadium Steel
• Standard: Conforms to DIN 3122, form F/ISO 3315 | • Hardened black jaws up to 65 HRC for heavy duty use
• Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5746 |
| Content |
| Mfr.PN |
Pattern |
Size |
Part Number |
| 389-10 |
Straight |
250mm |
HT0002470 |
|
| Mfr.PN |
Size |
Part Number |
| 364-8 |
1.25 - 8mm2 |
HT0002442 |
| 364-16 |
1.25 – 16mm2 |
HT0002443 |
| 364-25 |
5.5 – 25mm2 |
HT0002444 |
|
| Mfr.PN |
Length(mm) |
Part Number |
| 179-6 |
150 |
HT0002343 |
| 179-8 |
200 |
HT0002344 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 75-5 |
530 x 200 x 200 |
HT0000033 |
|
| Mfr.PN |
Sq.Drive |
Length(mm) |
Part Number |
| 112FH |
1/4” |
150 |
HT0001388 |
|
| Mfr.PN |
Length(mm) |
Part Number |
| 177-6 |
150 |
HT0002326 |
| 177-7 |
175 |
HT0002327 |
| 177-8 |
200 |
HT0002328 |
|
