| Description | • Precision ground edges for sharpness, guaranteed edge hardness up to 65 HRC
• Suitable for hardened wire, steel wire, tensile strength up to 2300
• N/mm2Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5749 | • Heavy gauge steel
• Drawer slides type ball bearing
• Powder coating finish | • Hardened black jaws up to 65 HRC for heavy duty use
• Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5746 | • Suitable for use in awkward areas, swivel angle up to 30°
• Sets of standard hex key in plastic clip holder
• Extra long pattern for difficult to reach areas
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.mp4"][/video] | • Left Cut: Cuts left from tight curves to straight
• Center Cut: Cuts straight and slight curves
• Right Cut: Cuts right from tight curves to straight | • For wire stripping |
| Content |
| Mfr.PN |
Length(mm) |
Part Number |
| 179-6 |
150 |
HT0002343 |
| 179-8 |
200 |
HT0002344 |
|
| Size(mm) |
No. of drawer |
Part Number |
| 650 x 316 x 386 |
6 |
HT0003453 |
|
| Mfr.PN |
Length(mm) |
Part Number |
| 177-6 |
150 |
HT0002326 |
| 177-7 |
175 |
HT0002327 |
| 177-8 |
200 |
HT0002328 |
|
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108BLS-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001007 |
| 108BLS-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001008 |
|
| Mfr.PN |
Pattern |
Part Number |
| 250 |
Left |
HT0002469 |
| 250 |
Straight |
HT0002470 |
| 250 |
Right |
HT0002471 |
|
| Description |
Length(in) |
Part Number |
| Automatic wire stripper 0.2-6mm2 |
8" |
HT0002457 |
|
