| Description | • Material: 31 CrV 3 Chrome Vanadium Steel
• Standard: Conforms to DIN 3123, form C/ISO 3316
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/11/Intro-0000614.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/11/Unibersal-Joint.mp4"][/video] | • Sets of standard hex key in plastic clip holder
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.mp4"][/video] | • Precision ground edges for sharpness, guaranteed edge hardness up to 65 HRC
• Suitable for hardened wire, steel wire, tensile strength up to 2300 N/mm2
• Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5749 | • Set of 6 pieces parallel pin punch of various size in plastic holder
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Parallel-Pin-Punch.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Parallel-Pin-Punch.mp4"][/video] | • Ratcheting mechanism with adjustable clamping force allows for precise, repeatable crimps
• Steel jaw contains color-coded wire size markings for red (22-18 AWG), blue (16-14 AWG), and yellow (12-10 AWG) terminals
• Ideal for nylon insulated solderless terminals - It is not recommended to be used with heat-shrink connectors
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Ratchet-Crimping-Plier.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Large-Retaining-Circlip-Plier-External.00_00_07_19.Still004.jpg"][/video] | • Sets of standard hex key in plastic clip holder
• Extra long pattern for difficult to reach areas
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Hex-Key-1.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Hex-Key.mp4"][/video] |
| Content |
| Mfr.PN |
Length(mm) |
Part Number |
| 126UJ |
54 |
HT0001493 |
|
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108S-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001003 |
| 108S-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001004 |
|
| Mfr.PN |
Length(mm) |
Length (In) |
Part Number |
| 179-6 |
150 |
6" |
HT0002343 |
| 179-8 |
200 |
8" |
HT0002344 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 196SH-8 |
2, 3, 4, 5, 6, 8 |
HT0002588 |
| 196SH-10 |
3, 4, 5, 6, 8, 10 |
HT0002589 |
|
| Mfr.PN |
Length(mm) |
Range |
Part Number |
| 214 |
200 |
22-10 AWG / 0.5-6mm2 |
HT0002435 |
| -
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108L-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001005 |
| 108L-9A |
1/16" - 3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001006 |
|
