| Description | • Material: 31 CrV 3 Chrome Vanadium Steel
• Standard: Conforms to DIN 3122, form A/ISO 3315 | • 7 adjustment position
• Meets & Exceeds DIN standards
• Made of hot forged, hardened & tempered chrome vanadium steel 40 CrV
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Waterpump-Plier.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Large-Retaining-Circlip-Plier-External.00_00_07_19.Still005.jpg"][/video] | • Suitable for use in awkward areas, swivel angle up to 30°
• Sets of standard hex key in plastic clip holder
• Extra long pattern for difficult to reach areas
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.mp4"][/video] | • Left Cut: Cuts left from tight curves to straight
• Center Cut: Cuts straight and slight curves
• Right Cut: Cuts right from tight curves to straight
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Aviation-Snip.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Tin-Snip.00_00_06_19.Still001.jpg"][/video] | • Precision ground edges for sharpness, guaranteed edge hardness up to 65 HRC
• Suitable for hardened wire, steel wire, tensile strength up to 2300 N/mm2
• Material: High grade tool steel
• Standard: Conforms to DIN/ISO 5749 | • For non insulated terminals
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Crimping-Plier-For-Non-Insulated-Termina.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Crimping-Plier-For-Non-Insulated-Termina.00_00_06_28.Still001.jpg"][/video] |
| Content |
| Mfr.PN |
Length(mm) |
Part Number |
| 125ST |
200 |
HT0001492 |
|
| Mfr.PN |
Length(mm) |
Part Number |
| 183-10 |
250 |
HT0002410 |
| 183-12 |
300 |
HT0002411 |
| 183-16 |
400 |
HT0002412 |
|
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108BLS-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001007 |
| 108BLS-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001008 |
|
| Mfr.PN |
Pattern |
Size |
Part Number |
| 389-10 |
Straight |
250mm |
HT0002470 |
|
| Mfr.PN |
Length(mm) |
Length (In) |
Part Number |
| 179-6 |
150 |
6" |
HT0002343 |
| 179-8 |
200 |
8" |
HT0002344 |
|
| Mfr.PN |
Size |
Part Number |
| 364-8 |
1.25 - 8mm2 |
HT0002442 |
| 364-16 |
1.25 – 16mm2 |
HT0002443 |
| 364-25 |
5.5 – 25mm2 |
HT0002444 |
|
