| Description | • Material: 31 CrV 3 Chrome Vanadium Steel
• Standard: Conforms to DIN 3123, form C/ISO 3316
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/11/Unibersal-Joint.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/11/Intro-0000614.jpg"][/video] | • Left Cut: Cuts left from tight curves to straight
• Center Cut: Cuts straight and slight curves
• Right Cut: Cuts right from tight curves to straight
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Aviation-Snip.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Tin-Snip.00_00_06_19.Still001.jpg"][/video] | • Designed for use in high-voltage areas with up to 1000V of alternating current, VDE certified, and built to meet IEC/EN 60900-2012
• Built with three functions– a flat gripping surface with fine serrations, a crimping edge and a cutting edge
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Combination-Plier.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/VDE-1000V-Combination-Plier.jpg"][/video] | • Ratcheting mechanism with adjustable clamping force allows for precise, repeatable crimps
• Steel jaw contains color-coded wire size markings for red (22-18 AWG), blue (16-14 AWG), and yellow (12-10 AWG) terminals
• Ideal for nylon insulated solderless terminals - It is not recommended to be used with heat-shrink connectors
[video width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Ratchet-Crimping-Plier.mp4" poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Intro-Large-Retaining-Circlip-Plier-External.00_00_07_19.Still004.jpg"][/video] | • Sets of standard hex key in plastic clip holder
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Hex-Key-Wrench.mp4"][/video] | • Suitable for use in awkward areas, swivel angle up to 30°
• Sets of standard hex key in plastic clip holder
• Extra long pattern for difficult to reach areas
• High torque ability and impact resistance suitable for heavy duty use
• Material: 59 CrMoV 4
• Standard: Conforms to DIN 911/ISO 2936
[video poster="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.jpg" width="1920" height="1080" mp4="https://startoolsindonesia.com/wp-content/uploads/2023/10/Extra-Long-Ball-End-Hex-Key.mp4"][/video] |
| Content |
| Mfr.PN |
Sq.Drive |
Length(mm) |
Part Number |
| 116UJ |
1/4” |
114 |
HT0001395 |
|
| Mfr.PN |
Pattern |
Size |
Part Number |
| 389-10 |
Straight |
250mm |
HT0002470 |
|
| Mfr.PN |
Size(mm) |
Part Number |
| 339-200 |
200 |
HT0003475 |
|
| Mfr.PN |
Length(mm) |
Range |
Part Number |
| 214 |
200 |
22-10 AWG / 0.5-6mm2 |
HT0002435 |
|
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108S-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001003 |
| 108S-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001004 |
|
| Mfr.PN |
Size |
Content |
No. Pieces |
Part Number |
| 108BLS-9M |
1.5-10mm |
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 |
9 |
HT0001007 |
| 108BLS-9A |
1/16"-3/8" |
1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" |
9 |
HT0001008 |
|
